How to Make a Sock Monkey Without Sewing
Download Article
Download Article
Have you ever thought sock monkeys were overrated? Are you bored of regular plushies? Do you have lonely left socks that are just dying to join the circus? Well, these lovable monsters are sure to scare your socks off and win your heart.
This article demonstrate how to make just one sock monster, but don't be afraid to let your imagination run wild while creating your very own sock monster.
Steps Download Article
-
1
Decide what your monster is going to look like; will he have wings, horns, teeth, a tongue, or extra arms and legs? Will he have a mohawk or long ears? What do you think his personality will be like; will he be shy and introverted, or crazy and extroverted?
-
2
Lay your material out in front of you. You will usually need two socks to create monsters, and you will almost always have plenty of extra scraps at the end of another monster's creation which will be useful for future projects; keep them safe and sound just in case. Your socks should be laying with their heels pointing up towards the ceiling.
- For the monster that this article will specifically show you how to make (his name is Quiggley), you will need two socks, preferably the same, but if not, socks of similar fabrics and complimentary patterns will be the best. The socks should have colored heels and toes.
Advertisement
-
3
Make the necessary cuts for the head. If he's going to have ears, make the cuts accordingly.
- Quiggley will need 2 slits on the side of the top of the heel and in the middle.
-
4
Make the necessary cuts for the neck. It's easiest to cut a 2 1⁄2 inch (6.4 cm) vertical line 1⁄2 inch (1.3 cm) underneath the heel and two small slits on the sides.
- Follow the above instructions for Quiggley's neck.
-
5
Make the necessary cuts for the arms, which will usually be a vertical line at the bottom of the sock with the cuts for the neck or a vertical line down the top of the second sock from the middle of the toe to about 2–4 inches (5.1–10.2 cm) below the heel.
- Quiggley has short arms with little 'mittens' which are made from the colored top part of the heel. You make his arms by cutting a vertical line starting at the center of the toe and ending 3 inches (7.6 cm) below the heel. From there, you cut a horizontal line across the bottom of the previous cut to separate the arms from the sock. Turn the arms wrong-side-out and stitch the edges together to from the very edge of the 'mitten' to the corner, but not the top, as it needs to be attached to the monster and stuffed.
-
6
The cuts for the legs are almost self-explanatory. All that is needed is a vertical cut down any of the two places the arms could be cut, except a bit longer.
- Quiggley's legs are cut from the bottom of the 'body' sock (the one that has the neck cuts). Cut a vertical line starting from the bottom center of the sock to less than halfway up the tube. Sew from the very bottom part of the leg to about 2 inches (5.1 cm) below the top so they can be stuffed and so you don't close the stuff-hole.
-
7
Make the cuts for any accessories or other limbs your monster might need.
- Quiggley has two large ears that are made from the very bottom part of the sock you used to make the arms. Cut a vertical line in the center where the arms stop and sew from the cuff up to the edge leaving the very top part open to sew it on and stuff it.
-
8
Turn the body of your monster wrong-side-out to sew on limbs and appendages. The easiest way to do this is to turn the limp/appendage right-side-out and to stick in the appropriate opening, pinning the edges together and stitching around it. Pull the limb/appendage out and it will be wrong-side-out like the rest of the monster.
- Follow the above instructions for Quiggley's arms and ears, being careful not to rip the seam when pulling the limb out.
-
9
Sew buttons on the monster or glue googly eyes on him so he can see. There can be as many or as little as you'd like, but try to make them compliment each other. A bunch of different buttons starts to look less like eyes and more like a bunch of buttons.
-
10
Stuff the monster, starting with his ears, moving to his face, then his neck, then his arms then his torso, tail, and lastly his legs. Add any last minute stuffing and use a ladder stitch to sew the stuff-hole closed.
Advertisement
Add New Question
-
Question
How do I make it just a furry oval with eyes?
Midmorrow
Community Answer
Cut the rounded end off a sock and fill with stuffing. Sew the open edge together so that it becomes rounded (do a running stitch and pull the thread so it becomes a circle). Cut some eyes out of felt or another fabric and glue on using fabric glue.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Thanks for submitting a tip for review!
Things You'll Need
- 2 socks with colored heels and toes
- Sewing Needle
- Thread
- Pins
- Fabric glue
- Buttons
- Stuffing
- Googly eyes (if you don't have buttons)
- Buttons
- Fabric Scissors
- Feathers, glitter, poof balls, etc...
About This Article
Thanks to all authors for creating a page that has been read 13,168 times.
Did this article help you?
How to Make a Sock Monkey Without Sewing
Source: https://www.wikihow.com/Sew-a-Sock-Monster
0 Response to "How to Make a Sock Monkey Without Sewing"
Post a Comment